Flyline Solar Pure sine wave power converting devise is a alternative power supply of one line ups. Almost all features are same as Online Power unit. This is developed and designed for saving investment cost and power saving. We can works this system with the help of solar power as well as KSEB current. This system includes Solar Inverter, battery and solar panel. Solar cell convert solar power to DC electricity. Flyline solar genset again convert it to AC current for the working all standard 240 Volt equipments.
Murickens Group is the first manufacturer and supplier of Solar Inverters in Kerala and have an experience of 15 long years in this field. The list of our satisfied clients runs long and prestigious institutions like Karipoor air port - CISF 7th battalion military camp, ISRO Sreeharikotta, Marine Fisheries Dept of India, Vallarpadam Container Terminal (IGTPL), Agricultural University in Malapuram, Government of Kerala etc. It is very essential that to get 100% out put of Solar Power Unit, the installation should be taken by a well experinced technical expert and also it can help a smooth and trouble free function of the system.
FLYLINE HYBRID INVERTER MORE INSTALLATION VIDEOS:-CLICK HERE
FLYLINE HYBRID INVERTER MORE IMAGES:-CLICK HERE
FLYLINE HYBRID INVERTER PDF:-CLICK HERE
► Pure sine wave out put. ► Work with the power of solar power/AC power , the best way to save money and nation by using natural resource.► Maintenance Free.► Provision for connecting KSEB current and solar power. ► Attractive Designs. ►Pollution free type. ► Single Switch Operation. ► Fully automatic. ► DSP based very low component cost design. ► Single sided PCB, easy to assemble without any SMD components. ► Auto resetting. ► Protection from lightening, High/Low Voltage Trip. ► Over Load Protection. ► Over Charge and Deep Discharge cut off. ► Independent Digital display for solar or KSEB charging voltage, main voltage, inverter voltage, load etc. ► Solar charger LCD display-panel voltage , battery voltage, out current, solar in use, direct mains, saved unit - only 36 and above volt system. , ,► Audio and Visual Indicators. ► Can be connected to the existing wiring. ► Bridge type center aligned switching MOSFET based topology. ► No husking sound. ► It is a fully automatic built-in charging control system, no need of any manpower. ►The Special feature of the system is, when the battery is full and there is sufficient sunlight the system will automatically cut the main line off (KSEB Line) and connect the solar system. This feature is applicable only if you use the recommended capacity of solar panel and solar inverter. ► The main advantage of our built in solar charger is floating type and once it fully charges the battery, it gone to trickle charging. This will provide more battery life and can utilize 100 % efficiency of solar panel power. ►The first preference is for solar charging and when the battery is low and there is no sufficient sunlight, there is an option for manual or automatic grid charging through separate switch. ►ISO: 9001 -2015 Certified solar power conditioner.►An ideal unit for part time power supply with low investment.
System priority Stage : - solar-battery-grid
1) When solar energy is sufficient total out put load will operate on solar Inverter. Excess solar power will charge batteries. 2) When solar energy is weak then inverter will take DC source from batteries to compensate the out put load. 3) When the battery discharge level reaches 11.2 volt or below, the out put load is shifted to grid and the battries are charged with the help of solar power only. 4) At Day time when each battery becomes 13.5 v the output load again shift to solar Inverter. 5) In 48 and above DC volt system of solar inverter - At night or when there is no sunlight the batteries reach 70% discharge level (30 % kept as a buffer) the out put load is shifted to grid without any change over time. (Each battery discharging level become 1.5 v ) 6) In 12 and 24 volt DC system of solar inverter - At night or when there is no sunlight, the out put load is shifted to grid and the battery back-up is used only when there is a grid failure. 7) After shifting the load to grid there is an optional on â€“off switch ( manual ) to charge the battery from grid up to 13.5 volt . 8) At night During changeover of load from battery backup to grid supply (i.e 70 % battery discharged) and if grid supply is absent then load is shifted to solar inverter to use buffer battery backup (i.e balance 30 %) 9) By using solar power the solar charger high cut-off is 14.5 V of each battery.
|Parameter||Single Phase Unit|
|Use||AS UPS as well as Inverter|
|1||Rating||650 VA to 5 KVA|
|2||Input Voltage Range||180V - 270 AC or Solar Power 12, 24, 36, 48V|
|3||Nominal Output Voltage||230V AC|
|4||Output Frequency||50 Hz: ± 1%|
|5||Input Frequency||45-55 Hz|
|6||Power Factory||-0.8 lagging to unit|
|10||Wave form||Pure sine wave|
Compact in size, Can work on Generators
|13||Charging||AC or Solar Power|
|14||Noise||Low noise <50db|
|15||Battery||12, 24 or 48v|
|16||Heat||above 50 degree|
Details of Flyline Sinewave Inverter :-Click Here
For more Pictures:-Click Here
Flyline Sinewave Inverter PDF:-Click Here
Product Short Informative Videos:- Click here
Product Detailed Informative Videos:- Click here
Useful technical informative videos:- Click hereClick Here